Made to secure rigid mechanical assemblies, Vibra-Tite 541 Retaining Compound is a high strength, high viscosity anaerobic adhesive. This 50 ml (1.7 oz) formula forms a tough, dependable bond that eliminates backlash and shores up worn parts by filling gaps as large as 0.015 inches. It holds strong under demanding conditions, whether you are locking keys and splines, fixing bushings and sleeves in housings, or bonding rotors to shafts in low horsepower motors.
It is ideal for knife makers, holster craftsmen and custom gear builders, and it cures without air between tight-fitting metal surfaces. Once cured, it stops bearing spin-out and strengthens the structure of your mechanical assemblies. With a 20 to 30 minute fixture time and a full cure in 24 hours, this green compound lets you reinforce parts without slowing your build schedule.
Specifications
- Retaining compound for rigid assemblies
- Net volume 50 ml (1.7 oz)
- Green
- Viscosity 950 cP
- Fixture time 20 to 30 minutes
- Full cure in 24 hours
- Maximum gap fill 0.015 in (0.38 mm)
- Shear strength 3,200 psi
- Specific gravity 1.1
- Temperature range -65°F to 350°F (-54°C to 177°C)
- Type T primer recommended for inactive metals
- MSDS number ND2215
- NSF non-food certified
- Offered in 10 ml, 50 ml, 250 ml and 1 liter sizes
- Comparable to ASI 80RC, Hernon Cylinlock 846, Loctite 680, Pacer ANL-80, Parson 3680, Rite-Lok RT80, Threebond 1377B, Titan 7680 and Turbo-Lock 17
